Amplifier Mono Board Accessory Diy Stereo Audio Tools Subwoofer Amp Speaker Tool

Description

Amplifier Mono Board Accessory Diy Stereo Audio Tools Subwoofer Amp Speaker Tool
Specification:
Brand Name: Aiyima
Maximum Power Per Channel: 131-200W
Features:
1. This amplifier board is mono, mono does not mean that only one speaker can be connected, and multiple speakers can be connected together (4-8 ohms within 30-150W total power), connected to the power amplifier board speaker cable! The speaker cable is a plug-in cable. It is not a soldering wire. It can be ringed when the speaker is connected. If the speaker has a binding post, please connect it to the terminal with a wire! (The binding posts are usually behind the speaker - red and black clips)
2. The amplifier board is built-in Bluetooth (no need for so-called Bluetooth stick, mobile phone Bluetooth connection can be used, boot default Bluetooth mode), Chinese prompt voice, the first connection to Bluetooth, the phone volume will automatically adjust to the factory volume, the phone volume Turn up to be able to note: Bluetooth has no call function,nbspcan install 6 inch 8 inch 10 inch (cylinder, tunnel, square) subwoofer!
3. Special Note:
The red and white sockets on this amplifier panel cannot be connected to other amplifiers for amplifier use (this connection is not feasible) and the satellite box audio head is used. The red and white sockets are only the audio input, if you have audio Line, then you can connect to mobile phones, computer hosts, DVDs, car CD players and navigation devices, you have to switch to the external audio mode by remote mode!
This amplifier board is recommended:30-150W 4-8 Ohm speakers and subwoofer!
Suitable for installation: 6-10 inch subwoofer DIY, 6-10 inch speaker. Home floor speaker. Stage sound.
Instructions:
1. Microphone function:
This power amplifier board supports dual microphones. The microphone can be directly plugged in and used. It can be sung by K song. When the microphone is used, the microphone is closer to the mouth, and the microphone volume is much larger. (Note: only has a microphone function, without microphone )
2. Bluetooth function:
When the power amplifier board is turned on, it will say Bluetooth mode. At this time, the universal setting of the mobile phone--Bluetooth--open--connecting signal JY1206B, the connection signal is successful, you can use Bluetooth!
3. The radio is used correctly:
The radio is used correctly: the black thin line on the power amplifier panel is the radio antenna. Hold it vertically by hand, then press the remote Mode button to switch to the radio mode, then press the power amplifier board pause/play button to search the station, red. The indicator light will flash continuously. If there is a rustling, the radio line of the hand moves to the left or right (stops moving when you hear someone). Then wait for the red indicator to flash to complete the search, then fix the line. can! (Note: the size of the station is to see where it is placed, the general city is better to receive some, township villages and mountains are less) If you mainly use the radio, please do not shoot, because the radio is an additional function! ! ! ! !
4. Memory card / U disk:
If you have a memory card, the U disk will be automatically recognized when plugged into the power amplifier board!
5. Audio mode:
If you have an audio cable and want to use the power amplifier board, you need to press the remote Mode button to turn to the audio mode every time you turn it on!
Package Include:
1 x Subwoofer Amplifier Board