Diy Power Amplifier Level Indicator Led Light Sound Control Audio Amp Accessory

Description

Diy Power Amplifier Level Indicator Led Light Sound Control Audio Amp Accessory
Description:
Brand Name: Aiyima
Feature:
• Aluminum alloy all-in-one chassis 74x 18.2x 18.5mm, LED light-emitting module to ensure uniform color.
• Customized 12-segment three-color LED light bar (7 green + 3 yellow + 2 red)
• The rising/falling speed of the main body of the light bar, and the holding time/falling speed of the peak light can be adjusted separately.
•DB mode and AGC mode selection (ultra-wide range of AGC adaptive algorithm to ensure the best results)
The AGC algorithm guarantees the best effect when the input signal amplitude changes.
• The brightness of the lamp can be adjusted in multiple levels.
• The software eliminates the input line noise function, which can significantly reduce the impact of input line noise
• Single button operation.
Specific operation: (When the button is pressed, there will be a corresponding LED indicating the button time)
1. In normal mode:
a. Press the button for 1 second-mode switch (there will be a corresponding preview)
display effect:
a.1 the main light bar + peak light stays and falls
b. The main light bar + peak light disappears after staying
c. Main light bar (no peak light)
d. Single point (main light bar single point)
2. Press the button for 3 seconds-Switch between dB mode and AGC mode (there will be a corresponding preview)
3. Press the key for 5 seconds-enter the speed and brightness setting mode
4. Press the button for 10 seconds-restore factory settings
5. Double click-turn on/off whether the first light is always on
6. Four clicks-turn off the noise canceling function (only effective in AGC mode)
7. Five clicks-turn on the noise canceling function (only valid in AGC mode)
8. Six clicks-turn on standby/turn off standby
(Standby: After 30 seconds of no signal, only two indicator lights are kept for breathing. Input audio signal is greater than -30db and lasts for more than 1 second to wake up and enter normal working state.)
2. Speed setting mode: (in normal mode, press and hold the key for 5 seconds to enter, and press the key for 3 seconds to exit when exiting)
1. Press the key for 1 second-in
1. Main body ascent speed (7-level speed optional)
2. Main body descending speed (7-level speed optional)
3. Peak dwell time (7-level time optional)
4 Peak descent speed (7-level speed optional)
5. Brightness adjustment (7-level range optional)
Cycle through the function.
3. Click the button-cycle to change the set parameters
Note: Corresponding value reference in DB mode: The value is for reference only, and there is no value display for the actual product.
Package Include:
1 x Level Indicator