(B180b-M1-200/300) DIY Mono Case-kit for ICEpower 200ASC/300AS1 & wiring harness

Description

ICEpower 200ASC/300AS1 are the same size, same install holes, same audio harness
Important:
1.  All case parts/connectors are packed
in bulk
，please assembly it for a completed project by your self --- DIY
2. This DIY case-kit, is designed for ICEpower 200ASC/300AS1 mono module
But
NOT including any
ICEpower amp module,
it's Alu case with connectors and harness only
All needed wiring harness are free included
Alu feet, audio connectors, screws.... all are included;
All in all, you just need to have
applicable amp module
in hand, then you can start to enjoy the assembling pleasure for a great amp.
Options:
Face-plate: you can choose Black or Silver face-plate. (The case body is always in Black color);
LED color: you can choose one of Blue/Green/Orange/White colors;
Pre-made audio harness included (Free)
All needed Pre-made audio harness, free included
All cables are cut to the suitable length, with correct plugs on ends
Mains wire: from IEC-inlet to module;
Signal wire: from module to input socket;
Speaker wire: from module to Binding posts;
LED wire: from module to Dimmer LED board;
Main Features
Well designed for
Mono Mode
, suitable for DIY Mono amp project
100% Aluminum Case, quality connectors...etc
Including all connectors, switches, aluminum feet...etc shown in pictures (NOT including any amp module)
Dimmer LED: DC +10v~~~+26v supply, Led brightness could be adjusted manually at the bottom of chassis
LED Color Option:
Blue
(Default),
Green
,
Orange
and
White
XLR socket: Quality metal D-shape, gold-plated XLR input, easily upgrading to any standard D-shape RCA/XLR sockets;
Binding Posts: Quality gold-plate Binding posts(cut-out Φ11.5mm),
easily upgrading to any hi-end binding posts;
Brief Specifications
Internal size: 193mm(W) x 58mm(H) x 180mm(D)
External size: 200mm(W) x 78mm(H) x 191mm(D) (size incl feet, excl connectors)
Color: 1) Full Black; 2) Silver-Face with Black body;
Face-Plate: 8mm thickness
Top-Cover: 3mm thickness, venting holes or slots
Bottom-Plate: 3mm thickness, pre-drilled holes for applicable module
Rear-Plate: 3mm thickness, laser imprint text
Packing List
(Per case-kit)
(All case parts/connectors are packed in bulk，please assembly it for a completed project by your self --- DIY)
Aluminum Case
Power Supply
Audio Parts
Accessories
* Front-Panel x 1
* Top-Cover x 1
* Bottom-Plate x 1
* Rear-Plate x 1
* AC-Inlet & Switch x 1
* XLR Socket x 1
* Binding Post(Pair) x 1
* Internal Harness
* Dimmer LED x 1
* Aluminum Foot (4pcs)
* Screws set